Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Auburn?
Spring replacement in Auburn typically costs $180 – $340 for one spring. That range covers the spring itself plus the labor to reset and balance the door, and it’s the same whether the spring is a torsion spring on the shaft above the door or an extension spring running along the tracks. Most doors have two springs, and because they wear at the same rate they’re usually replaced as a matched pair, so a pair runs about twice that range. The written estimate you get on site sets the final price, and the estimate is free.
We answer 24/7, and we dispatch Sunday through Friday from 7am to 7pm. If a spring has snapped and the door is stuck down or hanging open, call us at (833) 680-0666 and we’ll get a technician out to take a look. Spring replacement is a job that demands a specialist. A wound torsion spring holds serious stored force, and this is not a repair to attempt with a pair of vise grips and a ladder.
Key Takeaways
- One spring: typically $180 – $340 in Auburn. A matched pair: about twice that.
- Most spring failures happen on a door that also needs cables, rollers or a track check, and we’ll tell you what’s actually worn.
- We work on the brand already in your garage, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor.
- Free estimates, and the written quote is what you pay.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work breaks down against the other repairs that usually come up in the same visit. All figures are typical estimated ranges for the Auburn market in 2026, not a fixed price list. What you’re quoted depends on your door, and the written estimate settles it.
| Service | Typical Estimated Cost |
|---|---|
| Spring repair or replacement (one spring) | $180 – $340 |
| Matched pair of springs (both replaced together) | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| General garage door repair | $150 – $600 |
The spring line is where most calls start, but it’s rarely the only thing a technician looks at. A broken spring puts a sudden shock through the whole door system, and cables, rollers and hinges take the hit. If you call for a spring and the door turns out to also need a cable, you’re looking at spring plus cable rather than an open-ended number. We’d rather tell you up front that a cable is frayed than have it fail two months later.
What pushes a spring job toward the top of the range: heavier doors, taller doors, doors with high-lift or unusual track setups, and older doors where the spring hardware has seized and needs more careful work to free up. What keeps it near the bottom: a standard seven-foot single-car door with a clean torsion setup and nothing else worn out. If your door also needs a whole new opener, that’s a separate line item and we’ll quote it separately so you can see exactly what each piece costs.
What Affects Spring Replacement Pricing in Auburn
- Door weight and size. A double-car door carries more weight than a single, and the springs are sized to match. Heavier doors need heavier springs, which sit higher in the range.
- Torsion vs. extension springs. Torsion springs on the shaft above the door are the modern standard and most common in Auburn homes. Extension springs run along the tracks on older doors. Both are replaced as a matched set more often than not.
- Whether cables or drums need attention. A snapped spring often means a cable has jumped its drum or frayed. Addressing both at once is cheaper than two separate visits.
- How the door is currently sitting. A door stuck down blocks access and needs to be safely released before work starts. A door hanging open needs to be secured first. Either way, the technician has to make the door safe before touching the spring.
- Door age and hardware condition. On a door that’s been in place a long while, bolts seize and end plates can be worn. Freeing up old hardware takes time, and time is what you’re partly paying for.
- Brand and model compatibility. We work on the brand already in your garage, so the springs and hardware we fit are matched to the door you have rather than a generic substitute. That means Clopay, Amarr, Wayne Dalton and Raynor doors get the right parts, not whatever fits loosely.
Why Springs Fail and What to Watch For
A spring fails because it has a finite number of cycles. Every time the door opens and closes, the spring winds and unwinds, and eventually the metal fatigues and breaks. There’s no maintenance routine that resets that clock. What you can watch for is the warning signs: the door feels heavier when you lift it by hand, it opens unevenly or jerks, you hear a loud bang from the garage, or you see a visible gap in the spring coil. In Auburn’s climate, the swing between wet, cool winters and dry summers works the door hardware over the seasons, and old lubricant dries out, which adds friction and shortens spring life. If the door won’t open at all, don’t force it. A door with a broken spring should stay down until a technician has looked at it.
If you’re already planning to replace the springs, it’s worth reading our guide to spring replacement to understand what the visit involves from start to finish. If the door itself is at the end of its life, our team at Auburn Garage Door Repair Co can talk you through whether a new door makes more sense than pouring money into an old one.
How to Save on Spring Replacement
Spring work is a safety-critical repair, so the goal isn’t to shave the price down to nothing. It’s to avoid paying twice. A few practical ways to keep the cost sensible:
- Replace the pair, not just the broken one. If one spring has snapped, the other has lived through the same number of cycles and is close behind. Replacing both in one visit costs about twice the single-spring price, which is far less than two separate visits spread a few months apart.
- Bundle the small stuff. If rollers are worn or a cable is frayed, adding it to the same visit is cheaper than calling us back later. Roller replacement sits in the $110 – $220 range on its own.
- Get it looked at early. A door that’s running heavy or jerking is telling you something. Catching a worn cable before it fails can save you a bigger repair.
- Ask for the written estimate. We quote per job and put it in writing before any work starts, so you know the number before the technician picks up a tool. The estimate is free.
Call (833) 680-0666 and we’ll get a free estimate on the books. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace: When Spring Work Isn’t Enough
Sometimes a spring replacement is all a door needs. Sometimes it’s the point where you have to weigh up the door itself. If the panels are rusted through, the tracks are bent beyond realignment, or the door is a style and size that parts are hard to find for, a new door starts to make more sense than repeated repairs. New door installation runs $700 – $2,200 depending on size, material and whether the opener is being replaced at the same time. For a door in decent shape, though, spring and cable work is almost always the cheaper path. That’s the conversation we’d rather have with you honestly than sell you a door you don’t need.
What Happens When You Call
You tell us what the door is doing. We ask a few questions to work out whether it’s a spring, a cable or the opener, and book a time. When the technician arrives, they check the door, confirm what’s actually failed, and give you a written estimate before starting. If it’s a spring, they make the door safe, fit the new spring or springs, and cycle the door to check the balance and travel. Same technician, same visit wherever possible. Because we’re a dedicated garage door company rather than a general handyman operation, we carry the knowledge on the brands already out there: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. Our technicians have up to 14 years of experience, and every job is backed by a satisfaction guarantee.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Auburn?
It typically costs $180 – $340 for one spring. A matched pair is about twice that, and because springs wear together, replacing the pair in one visit is usually the sensible move. Call (833) 680-0666 for a free estimate; the written quote sets the final price.
Is it cheaper to repair or replace a garage door spring?
Replacing is cheaper than repairing for a broken spring, because a spring that has snapped can’t be repaired, only replaced. Replacing the pair at once is cheaper than two separate single-spring visits spread over a few months. Call (833) 680-0666 and we’ll quote it plainly.
Can you replace my springs today?
Same-day service is often possible, so it’s worth calling to check availability. We answer 24/7, and we dispatch Sunday through Friday from 7am to 7pm. Call (833) 680-0666 to get booked in.
How long does the job take?
Most spring replacements are done in a single visit, and for a standard torsion setup the work itself is usually an hour or two, longer if cables or hardware also need attention. The estimate is free, so call (833) 680-0666 and we’ll talk you through what your door needs.
Do I really need to replace both springs if only one broke?
It’s the standard recommendation, and the reason is wear, not upselling. Both springs have been cycling for the same length of time, so the second one is usually close behind. Replacing the pair sits around twice the $180 – $340 single-spring range in one visit, rather than two visits. Call (833) 680-0666 with any questions before you decide.
Get Your Free Estimate
If your spring has gone, don’t wrestle with the door. Call (833) 680-0666 for a free estimate. We answer 24/7, and we dispatch Sunday through Friday from 7am to 7pm. Our technicians have up to 14 years of experience working on the brands already in the garage, and the written estimate is what you pay, so there are no surprises. Whether it’s a single broken spring, a full matched pair, or a door that’s finally due for replacement, we’ll give you a straight answer and quote it before we start.
Pricing reflects the Auburn market as of 2026. Auburn Garage Door Repair Co offers free estimates – call (833) 680-0666.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Jennifer Brooks"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Marco Reyes"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Anika Mehta