Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Kent?
Garage door repair in Kent, WA typically costs $150 to $600, depending on what’s broken. Spring repair runs $180 to $340 for one spring, cable repair $130 to $250, and a new door installation $700 to $2,200. Every job is priced by a written estimate, and estimates are free.
Most calls we take in Kent fall into one of a few buckets: a snapped spring, a door that’s come off its track, or an opener that’s given up. Each has a fairly predictable price range, and knowing those ranges before you call saves you from sticker shock. Below is how the numbers break down for the Kent market in 2026, what moves a price up or down, and how to keep a repair from turning into a replacement you didn’t need.
Garage Door Cost Breakdown (2026)
These are typical estimated ranges for Kent. The written estimate you get for your specific door sets the final price.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Garage door repair (general) | $150 – $600 | Diagnosis and fix of a working door with a single failure |
| Spring repair (one spring) | $180 – $340 | Replacement of one torsion or extension spring |
| Spring pair replacement | About twice the single-spring range | Matched pair, which is usually replaced together |
| Cable repair | $130 – $250 | Frayed or snapped lift cable, drum rewind, rebalance |
| Opener repair | $120 – $320 | Gear, board, sensor, or remote issues on an existing unit |
| Opener installation | $250 – $550 | New opener and rail, plus safety reversal testing |
| Panel replacement | $250 – $500 | Dented or damaged section swapped for a matching panel |
| Track realignment | $120 – $240 | Straightening tracks after an impact or a derailed door |
| Roller replacement | $110 – $220 | Worn steel or nylon rollers for quieter, truer travel |
| New door installation | $700 – $2,200 | Door, hardware, and setup, varying by size and material |
What separates the low end from the high end is usually the extent of the failure, not the part itself. A cable that snapped clean is a straightforward fix. A cable that snapped and yanked the door out of square can drag track and panel work along with it. Opener prices swing on whether the unit needs a small fix or a new head and rail assembly. And a new door depends heavily on size and material: a basic single-car steel door sits well below a larger, insulated, carriage-style door with windows.
Spring jobs deserve a note. The range above is for one spring. If your door has a matched pair – and most do – the standard practice is to replace both at the same time, since the second spring has done the same work as the one that just failed. That puts a pair at roughly double the single-spring range. It’s not an upsell; it’s what keeps you from paying a second visit a month later.
What Affects Garage Door Pricing in Kent
- Door size and weight. A wide two-car door carries heavier springs and more hardware than a single-car door, which moves the price on almost every service. The bigger the door, the more steel, cable, and spring tension the job involves.
- Door type and brand. We’re certified to work on eight major brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so we diagnose the equipment already in your garage rather than recommending a full replacement because the parts look unfamiliar. A door and opener that use standard, current parts keeps a job simpler and cheaper than an older or unusual setup.
- What actually failed. One worn roller is the low end of the scale. A chain reaction – spring fails, door drops, panel dents, track bends – pushes the job toward the top. We check the whole system, not just the obvious break.
- Weather and climate over time. Kent’s damp winters and the temperature swings between a wet, cold season and a dry summer are hard on springs and lubricated moving parts. Repeated freeze-thaw and constant moisture cycling wear on metal and seals. Doors that live outside the weather in a typical Puget Sound climate age on a steady curve, and that’s a repair-timing question more than a price one.
- Access and clearance. Tight garage spaces, a low ceiling on a torsion setup, or a door that needs careful handling to get at a track can add time to a job. We account for that in the estimate rather than on the bill.
- Repair versus replace. If a door is otherwise sound and one part failed, repair keeps you in the low range. If it’s sagging, rusting through, or the structure is compromised, replacement can be the honest answer even though it costs more up front. We’ll tell you which side of that line your door sits on.
How to Save on Garage Door
The single biggest thing you can do is get a free estimate before a small problem becomes a big one. A worn roller costs less to replace than the track damage it can cause if it’s ignored. Here’s where the savings actually come from:
- Keep the door you have if it’s sound. A repair on a healthy door almost always costs less than a new installation. We diagnose the specific failure and fix that, not the whole system.
- Replace both springs together. It sounds like more money now, but a matched pair replaced once beats two separate visits. The springs are designed to work as a pair.
- Lubricate the moving parts. Rollers, hinges, and tracks stay smoother and last longer with regular lubrication. It’s the cheapest maintenance you can do.
- Keep the door balanced. If you can lift the door halfway by hand and it stays, the springs are doing their job. If it drops or feels heavy, get it checked before the strain reaches the opener.
- Don’t force a stuck door. Pulling on a door with a snapped spring or a derailed cable can bend tracks and panels, turning a small repair into a bigger one. Call us instead.
If you’d like a straight answer on your specific door, call Auburn Garage Door Repair Co. Estimates are free, and you’ll get a written price before any work starts.
FAQs – Garage Door Cost
How much does garage door repair cost in Kent?
Garage door repair in Kent typically runs $150 to $600, depending on the failure. A single spring is $180 to $340, a cable is $130 to $250, and an opener repair is $120 to $320. Call (833) 680-0666 for an exact quote on your door – estimates are free.
How much does it cost to replace a garage door spring in Kent?
Spring replacement in Kent costs $180 to $340 for one spring. Since most doors use a matched pair, replacing both usually runs about double that range. Call (833) 680-0666 to confirm which setup your door has – the estimate is free and the written price is final.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper when the door structure and panels are in good shape and only one component failed. A repair in the $150 to $600 range beats a full installation of $700 to $2,200. If the door is sagging or the panels are failing, replacement can make more sense over time. Call (833) 680-0666 and we’ll give you an honest read on which way to go.
Can you come today?
Yes, same-day service is often available in Kent. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 680-0666 for a free estimate.
Does it cost more to fix a garage door at night or on a weekend?
No. The price for the work is set by the written estimate for the job, not by the hour it’s done. We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday; we’re closed on Saturday, and a call that comes in outside dispatch hours is booked into the next opening. Call (833) 680-0666 to set up a free estimate.
If your door is stuck, noisy, off its track, or just due for a closer look, we’re a phone call away. We work on the brand already in your garage, and we handle everything from a single spring to a full door and opener install so you don’t need to call a second company. We’re specialists – not a general handyman operation – and our technicians have up to 14 years of experience with the equipment in your home.
Call (833) 680-0666 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Kent market as of 2026. Auburn Garage Door Repair Co offers free estimates – call (833) 680-0666.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Jennifer Brooks"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Marco Reyes"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Anika Mehta